1x9 Bridged Telephone Module (expansion board with ABS bracket), includes 110 punch down tool

The 1x9 Bridged Telephone Board, designed to fit into any Leviton Structured Media™ enclosure, bridges up to four telephone lines through to nine outlet locations, allowing operation of up to nine separate telephones per line. Available ...

QuickPort 12-Port Multimedia Patch Block w/ mounting bracket, 10" H x 2.375" W (extra deep for heavy audio/video cables)

1 x 6 (6-Way) 2GHZ Passive Video Splitter

Use 4-, 6- and 8-way 1GHz Passive Video Splitters and Passive Video Splitter Modules to split digital cable, quality cable TV and off-air signals to 4, 6 or 8 televisions throughout a home or office. The Video Splitter Modules are designed for ...

1 x 8 (8-Way) 2GHZ Passive Video Splitter

Use 4-, 6- and 8-way 1GHz Passive Video Splitters and Passive Video Splitter Modules to split digital cable, quality cable TV and off-air signals to 4, 6 or 8 televisions throughout a home or office. The Video Splitter Modules are designed for ...

Twist & Mount Patch Panel, (12) Cat 5e ports and (12) Cat 6 ports

• CA2676764
• MX249737
• TWI285985

• US6641443
• US6786776
• US7722411

Twist & Mount Expansion Board - (6) Cat 5e ports

Twist & Mount Expansion Board - (6) Cat 6 ports

Multi-Bay Structured Media Enclosure, 14" + 14" + 14"

Multi-Bay enclosures provide excellent termination and mounting locations for both in-home structured wiring and fiber-to-the-home (FTTH) components. Structured wiring components typically mouont in the upper section of the dual enclosure and optical network termination (ONT) mounts in the lower section. The dual enclosure ...

Multi-Bay Structured Media Enclosure, 28" + 14"

Multi-Bay enclosures provide excellent termination and mounting locations for both in-home structured wiring and fiber-to-the-home (FTTH) components. Structured wiring components typically mouont in the upper section of the dual enclosure and optical network termination (ONT) mounts in the lower section. The dual enclosure can ...

Multi-Bay Structured Media Enclosure, 28" + 28"

Multi-Bay enclosures provide excellent termination and mounting locations for both in-home structured wiring and fiber-to-the-home (FTTH) components. Structured wiring components typically mouont in the upper section of the dual enclosure and optical network termination (ONT) mounts in the lower section. The dual enclosure can ...

DC Bus, 12 VDC and 24 VDC

AC Power Surge Module with 6 NEMA Receptacles for Input: 120VAC, 50/60Hz max current 15amp ul vpr: l-n/l-g/n-g: 600vp

IEC to NEMA adapter (NEMA 5-15R/ IEC 320 C14), 1' long, for use with 060-47605-PSA

21" Concrete Mountable Structured Media® Enclosure, Enclosure Only

28" Concrete Mountable Structured Media® Enclosure, Enclosure Only

Duplex Receptacle Power Box and Cover for use with Concrete Mountable Structured Media Enclosures

42" Concrete Mountable Structured Media® Enclosure, Enclosure Only

Recloseable Storage Ring, Outside Plant (24" diameter)

Recloseable storage rings are used for optical fiber and copper cabling service loops. The large 24-inch ring is designed for outside plant fiber and copper cabling in the entrance facility. The smaller 12-inch ring is designed for inside plant fiber and copper cabling ...

Voice Grade Patch Panel, 48-port, 2RU, 8P8C Jacks, 25-pair connector

QuickPort In-Wall Bracket Kit, includes bracket and single-gang wallplate mounting bracket

The QuickPort In-Wall Bracket provides the ability to create a testable permanent link for cabling that terminates in the wall without the use of a traditional wallplate. It is ideal for Ethernet-enabled devices that mount to electrical/low-voltage boxes ...

QuickPort In-Ceiling Bracket

The QuickPort In-Ceiling Bracket provides the ability to create a testable permanent link for cabling that terminates above a drop ceiling. The bracket is ideal for Ethernet-enabled devices that mount on or above the ceiling tiles, such as WAPs and cameras. The metal bracket is available with ...

QuickPort WAP Kit, two ports

The QuickPort Wireless Access Point (WAP) Kit combines all the pieces necessary to install a testable permanent link for cabling that terminates in plenum spaces. The kit is ideal for Ethernet-enabled devices that mount on or above ceiling tiles, such as WAPs and cameras. The ...

QuickPort WAP Kit, one port

The QuickPort Wireless Access Point (WAP) Kit combines all the pieces necessary to install a testable permanent link for cabling that terminates in plenum spaces. The kit is ideal for Ethernet-enabled devices that mount on or above ceiling tiles, such as WAPs and cameras. The ...

4-Position (7.0" H, 6.0" D) Hinged Wall-Mount Bracket

Create a first class cabling infrastructure and reduce network administration time using Leviton's Rack & Frame Cable Management solutions.

Horizontal Manager Cover, 4RU

Leviton Four-Ring Horizontal Cable Managers provide high volume cord distribution at the front of industry-standard 19-inch equipment racks and cabinets.